Modena Adattare Series User Manual page 7

Power Connection
WARNING!
For personal safety:
⚫
DO NOT use an extension cord or an adapter plug for this appliance
⚫
DO NOT under any circumstances, cut or remove the grounding
connection from the power cord
Electrical requirements:
Please look at the rating label to know the rating voltage and connect the dishwasher
to the appropriate power supply. Use the required fuse 10 amp, time delay fuse or
recommended circuit breaker and provide separate circuit for this appliance only.
Electrical connection:
Ensure the voltage and frequency of the power source match with the rating plate.
Only insert the plug to an electrical socket that properly grounded. If the electrical
socket is not suitable with the appliance's plug, replace the socket rather than using
an adapters as it could cause overheating and risk of fire.
Ensure that the grounding connection is proper before using the dishwasher!
Water Connection
Connect the cold water supply hose to a threaded 3/4
inch connector and make sure that it is fastened tightly
in place. If the water pipes are new or have not been
used for an extended period of time, let the water run
first to make sure that the water is clean and free of
dirt. If this precaution is not taken, there is a risk that
the water inlet get blocked and damage the appliance.
Please Note: If the supplied hose does not fit your tap, please contact your local
plumbing supply center where adapters are available for purchase.
7