Advertisement
Cleaning method
1. Wash the disassembled parts with flowing water; if the meshes are blocked up by dreg,
please use the cleaning brush for the cleaning.
Note:
Please do not use iron wire brush, abradant or sharp cleaning tool
for the cleaning.
2. Do not make the mainframe put into water for cleaning; and be sure to use wringed soft
cloth to clean it.
3. After cleaning, please dry the cleaned parts and store them in a clean and ventilating
place.
Notes:
1. Please wash the machine in time after use, otherwise the dreg will attach
to thecontainer, which will affect the assembly and cleaning, and even
result in perfor-mance reduction.
2. The rubber pad at the bottom of the squeezing cup may be washed. Please
refer to the contents in page 5.
9
Troubleshooting
Phenomenon
Cause
1. Whether the power plug is
inserted properly.
2.The quantity of materials put
into the machine is too much
3. Hard fruits and vegetables
are not cu.
The running machine
4.Continues working time more
stops suddenly
than 20 Mins.
Materials stored in refrigerator
too long before squeezing.
The juice amount is small
The rubber pad at the bottom
Juice flows out of the
of squeezing cup is not
mainframe
installed properly.
1. Accessories are not properly
installed.
2. The machine is put on oblique
ground.
3. Parts cause extrusion sound
There is abnormal noise
during squeezing.
1. Dreg attaches to the container
2. The container and
accessories are liable to be
The container and
dyed when materials with
accessories are dyed
pigment (such as carrot,
after use
spinach，etc.) are used for
squeezing.
Troubleshooting method
1. Make the plug inserted into
the socket.
2. First, press "R" for 2-3s to
make the materials return
upwards; then choose function
button and start again(repeat
the process for about 3 times).
If the machine still does not run
please clean the machine and
then use it.
3. Hard fruits and vegetables
(such as carrot) shall be
squeezed after being cut into
strips.
4. Let machine stop and cool about
10 Mins, restart it again if need.
1. The juice amount will be
increased if the materials are
squeezed after being immersed
in clear water for sufficient
water absorption.
2. Use fresh fruit.
Please reinstall the
squeezing rubber pad by
referring to the installation
method.
1. lnspect whether the
accessories are properly
installed after the machine
stops.
2. Please put the machine on a
plane.
3. The sound caused by extrusion
of fruits and vegetables, and
please do not worry about it.
1. Clean the machine in time
after use.
2. Clean the machine with
detergent after use.
10
Advertisement
