Pairing radio linked alarms instructions (2 pages)
Summary of Contents for Firehawk CO5B
Page 1
Important information Carbon Monoxide Alarm Guide CO5B CO7B CO7B (10Y) CO7B (10Y)W CO7BD YEAR YEAR YEAR SENSOR SENSOR BATTERY WARRANTY WARRANTY INDICATORS SOUNDER LED DISPLAY (if fitted) TEST/DISPLAY BUTTONS USER MANUAL ASSEMBLY & SWITCHING ON YOUR CO ALARM ALWAYS read the ENTIRE...
Page 2
GUIDE TO Lights & Sounds Carbon Monoxide Alarms CO5B CO7B CO7B (10Y) CO7B (10Y)W CO7BD YEAR YEAR YEAR SENSOR SENSOR BATTERY WARRANTY WARRANTY ALARM POWER IS OK LOW BATTERY OR FAULT Press the TEST button to test all lights. Alarm will beep 4 times.
General Guidance Carbon Monoxide Alarms POSITIONING The position of the alarm should be where it can detect CO as soon as possible to alert and protect the occupants of the premises. (Do not place closer than 1m from the source appliance) Make sure it can be heard by the occupants when in all parts of the premises including behind closed doors.
Page 4
Installation, pair & test Wireless Carbon CO7B (10Y)W Monoxide Alarms CONNECTION POSITION & PAIR Switch on the radio base Take alarm to its working location. (plug-in alarm when required) Press the pairing button ASSEMBLE TEST SYSTEM • Fix alarm to radio base within 15 Wait for each alarm to: seconds of pressing the pairing button 1.
Page 5
End User Instructions Carbon Monoxide Alarms END USER INSTRUCTIONS REMEMBER - The overriding instruction is to ALWAYS follow the manufacturers guidance. Test the alarm once a week to ensure it is still operating. ONLY use the test button. Vacuum the alarm to keep the vents clear of dust and insects Every six months clean the alarm with a damp cloth (do not use spray or chemical cleaners and polishes) In the event of a problem, read the handbook and / or contact the manufacturer...
Need help?
Do you have a question about the CO5B and is the answer not in the manual?
Questions and answers
my Firehawk carbon monoxide alarm has reached end of life but how do you stop it bleeping ? and how do you dispose of it?
To stop the beeping of a Firehawk CO5B carbon monoxide alarm:
1. Identify the beeping pattern:
- Three beeps every minute indicate the end of life.
- Two beeps every minute indicate a fault.
2. Do not open the alarm—there are no user-serviceable parts.
3. To stop the alarm:
- Remove it from the baseplate to turn it off.
To dispose of the alarm:
- Return it to the manufacturer at the address provided in the manual.
This answer is automatically generated