Connection to “Aquarium Controller” system Connect the low conductivity probe’s connector to the interface (ACQ210N-MS). Connect the ACQ210N-MS interface to the power unit (or HUB) using the provided BUS cable. NOTE: Insert the correct end of the connector into the power unit; inserting it in the other direction can seriously damage the equipment.
Page 4
Thanks to the special shape of the box and fixing bracket, the interface can be fitted with others simply and very quickly, as seen below. 4 - 16 IsACQ210NMSC-0 (ENG) Rev.250708-0 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
• Select the letter to insert using the keys and move within the word using the keys. When finished, press “Enter”. (Fig. 4) 5 -16 IsACQ210NMSC-0 (ENG) Rev. 250708-0 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
Page 6
(Ref. + ∆MAX); the out- puts on the upper line are set using the key. 6 - 16 IsACQ210NMSC-0 (ENG) Rev.250708-0 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
Page 7
(lower right corner) for the se- 18:00 850 µS lected time. When finished, press the “Enter” key. (Fig. 9) 7 -16 IsACQ210NMSC-0 (ENG) Rev. 250708-0 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
Page 8
“Enter”. The delete screen will appear. Press “Enter” Enter: Confirm to delete or “Esc” to cancel. Esc: Cancel (Fig. 12) 8 - 16 IsACQ210NMSC-0 (ENG) Rev.250708-0 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
Page 9
After programming the various settings, press “En- ter”. 9 -16 IsACQ210NMSC-0 (ENG) Rev. 250708-0 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
Page 10
Calibration OK Press any key to continue (Fig. 18) 10 - 16 IsACQ210NMSC-0 (ENG) Rev.250708-0 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
- Do not immerse the probe completely in water. The cable’s seam must always be ap- proximately 2 cm above the water. IMPORTANT For reliable conductivity readings, use only AQUATRONICA electrodes. The use of other brands of electrodes could cause incorrect readings of the instrument.
Local regulations may provide for the separate collection of household appliances at municipal waste sites or retailers when a new product is purchased. 13 -16 IsACQ210NMSC-0 (ENG) Rev. 250708-0 Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403 Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com...
Warranty Dear Customer, Thank you for the trust you have placed in AQUATRONICA by purchasing this product. AQUATRONICA subjects all its products to severe quality tests. If, in spite of the controls, the product should malfunction, we recommend you immediately contact the dealer/producer for any checks or interventions necessary.
Need help?
Do you have a question about the ACQ210N-MS and is the answer not in the manual?
Questions and answers