Table of Contents
Advertisement
2.3 Technical
Specifications
2.3.1 Overall Size (W x L x H)
2.3.2 Electrical
2.3.3
Other Facility
Requirements:
2.3.4 Weight
2.3.5 Seismic Anchorage
Crest Healthcare Console Junior R:1
Important User Information
The following specifications are intended to describe the technical
information located on your unit nameplate and to state other relevant
information. Check the previously supplied equipment drawing and/or
identification nameplate for proper voltage and amperage.
NOTE: Electrical and plumbing services must be flexible or have a
quick disconnect so Ultrasonic Cleaning System may be moved
away from the wall for servicing.
Sonic Cleaner - 35 x 30 or 36 x 38-1/2"
•
(889 x 762 or 914 x 978 mm)
Power Supply: 240 V, 60 Hz, 1-Phase (3 wire) or 208 V, 3-Phase
(5 wires including neutral and ground),208 V, 1-Phase (4 wires).
Power Cord Specification:
•
Sonic Cleaner - Minimum 8 AWG, rated 194°F (90°C), 600 V
NOTE: Power cord and wall receptacle are not furnished by
Crest. Verify power cord and wall receptacle used meet all
national and local electrical codes (ensure UL817 compliant).
Only
use
green/yellow
protective conductor terminals.
Disconnect Switch:
•
Sonic Cleaner - 60 Amp rated, lockable, fusible, UL Listed E2875
and 154828 (or equivalent)
Drain: 1-1/4" CPVC Male Slip (trap and waste lines are not provided
by Crest).
Distilled (Purified) Water (Optional): 1/2" CPVC Male Slip (15-
50 psi); 100-120°F (38-49°C).
Hot Water: 1/2" CPVC Male Slip (15-50 psi); 100-120°F (38-49°C).
Cold Water: 1/2" CPVC Male Slip (15-50 psi); 40-60°F (4-16°C).
NOTE: Customer is responsible for compliance with applicable
local and national codes and regulations.
•
Sonic Cleaner - 15-gal: 452 lb (205 kg)
20-gal: 545 lb (247 kg)
A Seismic Anchorage System is available for high-risk seismic zones.
Operator Manual
conductors
for
connection
to
2-3
Advertisement
Table of Contents
