Best ACES 2 User Manual page 40

Temp_Adjust1 allows the compressor to come on at the new desired temperature (Filter (value)) in
this example it is 25.5 degrees which is 1 degree increase from the events setting. It then allows
compressors on (format) by sending to the ACES2 unit out5=0 (Services).
Temp_Adjust2 is used to turn the compressors off when it drops below 25 degrees, by sending
out5=1 (Format) to theACES2 (Services). It uses the same reaction time and sensor as the first
command.
Temp_Adjust3 and Temp_Adjust4 work on the same principles but is controlling AC2 during the
night period which needs to be set to 7pm to 6:55am again not to interrupt the 7am schedule
change.
ACES 2019 – User Manual Page 40 of 45