Best ACES 2 User Manual page 37

Auto2 Instruction
The second instruction above, basically monitors the state of out0 on the ACES2 system (Topic), if
it is 1 (Filter (value)), it will reset it back to 0 (Format) by sending the command to the ACES2
(Services).
Take note on this setup we do not use a delay time (suppression) so can act as soon as updated from
ACES2 unit.
This command execution, reconnects the temperature sensor to the system creating a reset and
bringing the sensor back online.
ACES 2019 – User Manual Page 37 of 45