Page 1
Lorex Home Center Extender AX62TR Series Quick Start Guide lorex.com...
Page 2
Welcome! From all of us at Lorex, we welcome you to our community – thanks for your purchase of the Lorex Home Center Extender. We designed this product with you in mind, to extend the performance and range of our new Lorex Home Center.
What you’ll find in the box Lorex Home Center USB Power Pack Extender...
Page 4
Overview indicator Reset / disable alarm button USB power Speaker port...
Page 5
Placement of the Lorex Home Center Extender Based on factors such as the distance between your devices, the size of your home, environmental conditions, physical obstructions, and how much frequency interference there is in your area, here are some placement recommendations for the extender/repeater.
Page 6
Placement of the Lorex Home Center Extender • Limit the amount of walls, ceilings, and other major obstructions between the extender/ repeater and your other Lorex device(s). • Make sure that the outlet that you choose has a strong Wi-Fi signal from...
Note: The LED light will flash blue when ready to pair. Unlock the Lorex Home Center and tap on Device Manager in the homescreen. Go to the Repeater tab, then tap + on the top right to pair. In the Device Setup screen, tap Repeater and tap Next.
Device Settings You can view the extender/repeater’s device information or configure the settings for sound, LED light status, and firmware updates, all through the Lorex Home Center. To open the extender/repeater’s Device Settings: Unlock your Lorex Home Center and tap the extender/repeater displayed on the homescreen.
Doorbell Chime: When someone rings the doorbell, the extender/repeater will sound the doorbell chime. The chime is enabled by default. Note: You must have a Lorex doorbell connected to the Lorex Home Center for this option.
Page 10
• LED status is turned off • Powered on • Pairing successful • Strong Wi-Fi signal strength Pairing with other devices (flashing) Resetting Disconnected from the Lorex Home Center (flashing) Firmware update in progress (flashing alternatively) Weak Wi-Fi signal strength Alarm has been triggered (flashing)
Make sure that your faraway camera(s) are connected to the extender/repeater directly. To check this, go to the Lorex Home Center’s Device Manager settings from the homescreen and see if your camera(s) are still connected. If you’re finding that your camera(s) are still connected to the Lorex Home Center and not to the extender/repeater, then you will need to do the following: Power off the camera(s) with low Wi-Fi signal strength.
Page 12
Lorex Home Center Extender For up-to-date information and support, visit help.lorex.com/series/LHCE. Important: • The Lorex Home Center Extender is rated for indoor use only. Do not use outdoors. • Only use with included power supply. • A Lorex Home Center is required to operate the Lorex Home Center Extender.
Need help?
Do you have a question about the AX62TR Series and is the answer not in the manual?
Questions and answers