Table of Contents
Advertisement
Chapter 1
3. CPU Configuration
3-1. CPU Socket 478 Configuration Steps:
CPU Fan
CPU
1.
Pull the lever sideways away from the socket then raise the
lever up to a 90-degree angle.
2.
Locate Pin A in the socket and look for the white dot or cut
edge in the CPU. Match Pin A with the white dot/cut edge
then insert the CPU.
3.
Press the lever down. Then Put the fan on the CPU and buckle
it and put the fan's power port into the JCFAN1, then to
complete the installation.
Motherboard Description
9
Advertisement
Table of Contents
