ZyXEL Communications ZyAIR G-5100 Support Notes page 42

5. When you reach the farthest point of connection mark the spot. Now you move the access point to this new
spot as have already determine the farthest point of the access point installation spot if wireless service is required
from corner of the room.
6. Repeat step 1~5 and now you should be able to mark an RF coverage area as illustrated in above picutre.
7. You may need more than one access point is the RF coverage area have not cover all the wireless service area
you needed.
8. Repeat step 1~6 of survey on site as necessary, upon completion you will have an diagram and information of
site survey. As illustrated below.