Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Micropack FS301
Summary of Contents for Micropack FS301
- Page 1 FS301 FLAME SIMULATOR SAFETY & TECHNICAL MANUAL Ref: 2301.6042 ECN: 4431...
-
Page 2: Table Of Contents
Diagnostics Replacement and Repair Technical Specification Electrical Specification Mechanical Specification Environmental Specification Certification and Approvals Appendix A Help us to help you This document is strictly private and confidential, reproduction without Micropack approval is prohibited. © Micropack Engineering Ltd, 2015... -
Page 3: Safety Instructions
If in any doubt ask your local sales representative or contact Micropack (Engineering) Ltd. • Micropack (Engineering) Ltd takes no responsibility for use of its equipment if this is not in accordance with the appropriate issue and/or amendment of the manual. -
Page 4: Introduction
The enclosure comprises of two enclosure covers (one with a faceplate window), the enclosure body (with certification label) and fixing collars to connect the enclosure body and covers together. This document is strictly private and confidential, reproduction without Micropack approval is prohibited. © Micropack Engineering Ltd, 2015... -
Page 5: Operating Instructions
The picture above shows the FS301 flame simulator. The on/off pushbutton is shown to the underside of the flame simulator. The charging socket is on the reverse end from the faceplate window, inside the end cap. The FS301 flame simulator will operate for a maximum of 60 seconds before timing out. -
Page 6: Maintenance And Testing
/ recharge cycle will be required. NOTE: BATTERY CHARGING SHOULD NEVER TAKE PLACE WITHIN A HAZARDOUS AREA. This document is strictly private and confidential, reproduction without Micropack approval is prohibited. © Micropack Engineering Ltd, 2015... -
Page 7: Fault Finding
Rev: 2.3 ECN: 4553 Fault Finding Diagnostics Fault finding by personnel other than Micropack employees is prohibited and non-compliance of this will invalidate the warranty. If the flame simulator fails to operate there are two simple causes: The flame simulator batteries need recharged, or The unit is faulty and needs to be returned to Micropack. -
Page 8: Technical Specification
410L x 200H x 175W Shipping Weight Environmental Specification Parameter Units Comment Operating Temperature °C Charging Temperature °C Relative Humidity % RH Non Condensing This document is strictly private and confidential, reproduction without Micropack approval is prohibited. © Micropack Engineering Ltd, 2015... -
Page 9: Certification And Approvals
FS301 Flame Simulator FS301 Safety and Technical Manual Ref: 2301.6042 Rev: 2.3 ECN: 4553 Certification and Approvals Parameter Authority/Standard Approval Certificate Hazardous Area Certification EN 60079-1:2014 Ex II 2 (2) G Ex db FM09ATEX0034 (op is T6 Gb) IIC T6 Gb IP66... -
Page 10: Appendix A Help Us To Help You
FS301 Flame Simulator FS301 Safety and Technical Manual Rev: 2.3 ECN: 4553 Ref: 2301.6042 Appendix A - Help us to help you From: QA Department Micropack (Engineering) Limited Fire Training Centre Schoolhill, Portlethen AB12 4RR Tel: +44 (0) 1224 784055... - Page 11 Portlethen, Aberdeen AB12 4RR Colorado, 80526 Tel: +44 (0)1224 784055 Tel: +1 970 377 2230 Fax: +44 (0)1224 784056 Fax: +1 970 377 2273 Email: sales@micropack.co.uk Email: info@micropackamericas.com ISO9001:2008 micropack.co.uk micropackamericas.com Certified Subject to modifications. © 2015 Micropack (Engineering) Ltd.
Need help?
Do you have a question about the FS301 and is the answer not in the manual?
Questions and answers