Chapter 3
3.3.2 Run RAID Administrator
The following steps should be taken to run RAID Administrator.":
1.Click
Administrator.
2.Then the main interface of RAID Administrator will come up. (see below).
Tool Bar:
It provides shortcut way to execute the common commands. Commands shown
by
Tool Bar
can also be found under
Disk Tree:
It shows the connecting information of all hard disks in two ways:
View by Device
Status Pane:
It lists the information and working status of selected hard disks or disk arrays.
Start-->Program-->RAID
Configuration
and
View by Adapter.
3-9
RAID Setting Guide
Administrator-->RAID
menu.