Led Indications; Key Function; General Switch On - Aquarea AIR 200 Installation Manual

U I S
6.1 4 speed LCD electronic command panel on board the machine
The command makes environment temperature adjustment
completely autonomous through the adjustable set point,
from 5 to 40°C, of one of the 4 speeds, and the summer/
winter selection.
Since it is connected to the water temperature detection
probe inside the battery, it carries out the minimum winter
temperature function (30°C) and maximum summer
temperature function (20°C).
The control panel has function memory, so all the settings
are not lost in case of switch off or in the event of power
failure.
6.2

LED indications

The 6 LED indicators show the operation status:
Green symbol minimum speed
Green symbol average speed
Green symbol maximum speed
6.3

Key function

The various functions are set with the 4 keys:
Temp + allows to increase set temperature
Temp - allows to decrease set temperature
6.4

General switch on

To manage the fan coil through the control panel, it must
be connected to the mains.
In case of a general switch on the mains supply line, it
A
USE
After 20 seconds from the last action, the panel light
purposely dims down for greater comfort during night
time, and the environment temperature is shown on the
display. Maximum luminosity is restored when pressing
any key.
A Display
B Keys and LED indicators
Green symbol Supersilent function
Red symbol heating
Blue symbol cooling
Heating / Cooling : allows to switch operation
mode between
seconds)
Allows to activate the device, to select one of
the 4 speeds or to go in stand-by (2 seconds).
must be switched on.
- Switch on the system with the main switch.
USE
B
heating and cooling (2
EN
23