Page 2
Disconnect the battery pack before storing your model. WARRANTY WRC guarantees this model kit to be free from defects in both material and workmanship within 30 days of purchase. The total monetary value under warranty will in no case exceed the cost of the original kit purchased.
Page 3
TECHNICAL INFORMATION TECHNICAL DATA - BRAKE:Laser cut brake disck with Ferodo brake pad - WIDTH ..........310 mm - WHEELS LOCK:Lightweight 17 mm 7075 T6 Nut - WHEEL BASE ....adjustable 315-320 mm - CHASSIS:4.0 mm Swiss 7075 T6 aluminium - WEIGHT READY TO RUN ....3500g - RADIO PLATE:Composite Material - FUEL TANK..........150cc - DRIVETRAIN TYPE:Spring steel CVD Driveshfts...
Page 4
BAG 1 Front Diff. Gear 100811 100805 97000 100810 Ø2.5x11.8 100815 100809 95014 O-ring 6x2 100805 100809 100813-L 95014 90024 O-ring 6x2 8x16x5 97000 Ø2.5x11.8 100802-L 90024 8x16x5 100812 92004 M3 x12 100812 DIFFERENTIAL OIL : Front : 500000 cst Weight : 3 g 100804-05 Fill the differential up to the top of the pin.
Page 5
BAG 2 Rear Diff. Gear 100811 100805 97000 100810 Ø2.5x11.8 100815 100809 95014 O-ring 6x2 100805 100809 100813-L 95014 90024 O-ring 6x2 8x16x5 97000 Ø2.5x11.8 100802-L 90024 8x16x5 100812 92004 M3 x12 100812 DIFFERENTIAL OIL : Rear : 40000 cst Weight : 3 g 100804-05 Fill the differential up to the top of the pin.
Page 6
BAG 3 Rear Transmission Cut on both front and rear bulkhead blocks 97022 Ø2.5x14.8 100605 98015 M5x4 90024 100201 8x16x5 100817 100606 13.2x15.9x0.2 100603 100616 100612 GREASE 90024 8x16x5 200013 100201 93005 M3 x14 GREASE 100817 93007 13.2x15.9x0.2 M3 x18 93005 M3 x14...
Page 7
BAG 4 Front Transmission Cut on both front and rear bulkhead blocks 97022 Ø2.5x14.8 98015 100605 M5x4 90024 100201 8x16x5 100817 100606 13.2x15.9x0.2 100603 100612 100616 GREASE 90024 8x16x5 100201 100817 13.2x15.9x0.2 GREASE 93007 M3 x18...
Page 8
BAG 5 Front Suspension Lower Arm Position 92008 M3 x20 98019 ADJUST THE PLAY M5x8 WITH THE SHIMS 100452 100507 F-R 100512 100512 100506 F-F 100302-H (Hard) OPTIONAL 100302-S (Soft) 100302-M (Medium) 97024 Lower Arm Position Ø4x65 91011 M3x40 SCREW POSITION...
Page 11
BAG 8 Rear Suspension Lower Arm Position 91011 M3x40 98019 100510 M5x8 ADJUST THE PLAY WITH THE SHIMS 100512 100301-H (Hard) 98019 100452 M5x8 OPTIONAL 100301-M (Medium) 100301-S (Soft) 97024 Ø4x65 100512 100511 92008 M3x20 100301 Lower Arm Position 98000 M3x3 91010 M3x20...
Need help?
Do you have a question about the GT4-1 and is the answer not in the manual?
Questions and answers