Advertisement
Chapter 4
No power to monitor.
Incorrect information
entered into the
configuration (setup)
program.
All or part of the system
may be inoperable. The
new card may work but a
mouse or COM port may
not work.
Check the configuration
program. Replace any
incorrect information.
Trouble Shooting
Change the interrupt or
RAM address on the
new expansion card.
See the documentation
that came with the new
card in order to change
pin settings. Many
expansion devices
come with proprietary
software that will assist
you in doing this.
Review system's
equipment . Make sure
correct information is in
setup.
Advertisement
