Table of Contents

Advertisement

Operation:

1 .
When operating the refrigerator for the first time, set the thermostat dial at 3,
connect to the electricity and turn it on without loading any food. Wait for
the appliance to become cold, usually this takes 2 or 3 hours. Then set
the thermostat dial to the desired setting and place foods into the
refrigerator.
2.
The temperature of the refrigerator can be adjusted by turning the
thermostatic dial. Setting of the thermostat dial at 3~4 is the most
suitable for general operation. The higher the number, the colder
the temperature.
Do not overload the refrigerator. Where possible
3.
open the door less often in order to maintain
the temperature of the refrigerator and save
electricity.
Cautions:
If the power supply is turned off for any reason, wait ten minutes
before switching the appliance on again.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

744240

Table of Contents