Nero 744240 Instruction Manual

REFRIGERATOR
744240 744240
INSTRUCTION MANUAL INSTRUCTION MANUAL
2 Year Warranty
Instructions for Installation Instructions for Installation
1. Do not tilt the refrigerator more than 45.
2. To ensure the cabinet does not become damaged,
do not apply force to any part of the refrigerator
such as the condenser, the door and its handle.
Damage to the cabinet will result in poor
refrigeration performance.
3.
For optimum performance ensure correct ventilation space around the refrigerator.
4. Avoid direct sunlight, heat sources and very moist or humid places. Do not install this
refrigerator near flammable, combustible or explosive materials.
5. Install the refrigerator on a strong, level floor. Do not install on soft materials
such as foam or plastic.
6.
The appliance should be left for 2 hours after installation before it is turned
on, in order to allow the refrigerant to settle.
Avoid installing the appliance in very cold conditions as the performance of the a
7.
ppliance will be impaired.
R
Parts and Features
Instructions for Installation
Cautions for Safety
Operation
Cleaning and Maintenance
Changing the Light Bulb
Reversing the Door
Troubleshooting
Warnings
Important Disposal Instructions
R600a Refrigerant
Please read this users operation manual before using.
Because of product improvement, your refrigerator
may vary from this user manual
Cautions for Safety Cautions for Safety
Ensure the voltage in the power socket is the same as the rated voltage
1.
of this appliance.
2. The power plug should have its own separate outlet socket in order to
prevent the outlet socket from being overloaded by other plugs.
Force
3.
Do not splash water on to the refrigerator, this may cause a malfunction
or electric shock.
4.
Do not store flammable materials such as petrol, LP gas and glue
etc, inside the refrigerator.
5. If the power supply cord is damaged, it must only be replaced by the
manufacturer, its service agent or similarly qualified persons.
6. Under no circumstances should you attempt to repair the machine
yourself. Repairs carried out by inexperienced persons may cause
injury or serious malfunctioning. Contact your local Service Centre.
CONTENTS
2
3
4
5
6
7
7
9
10
11
11
Chemical Material
Parts and Features Parts and Features
1 Worktop
Cabinet
2
Wire Shelves
3
Crisper Cover
4
Crisper Box
5
6 Adjustable Feet
Thermostat
7
Door Switch
8
9 Door Assembly
Door Balconies
10
Door Gasket
11
Operation Operation
1. When operating the refrigerator for the first time, set the thermostat dial at 3,
connect to the electricity and turn it on without loading any food.
appliance to become cold, usually this takes 2 or 3 hours. Then set the thermostat
dial to the desired setting and place foods into the refrigerator.
2. The temperature of the refrigerator can be adjusted by turning the
thermostatic dial. Setting of the thermostat dial at 3~4 is the most suitable
for general operation. The higher the number, the colder the temperature.
Do not overload the refrigerator. Where possible
3.
open the door less often in order to maintain the
temperature of the refrigerator and save electricity.
Cautions Cautions
If the power supply is turned off for any reason, wait ten minutes before
switching the appliance on again.
Wait for the