Nokia RH-18 Troubleshooting Instructions page 56

RH-18/38
1 Select Tx PA Mode low and tune the high lighted values.
2 The base level coefficient is taken from the high mode. Do not change it.
3 Calculate and select Stop
If you are satisfied with the coefficients and the power, then save to the Permanent
memory.
You can also save the table to the PC, so that you can load it to an other phone. Or you
can select not to do anything by removing both ticks.
Only way to end the tuning session is with Yes
Page 56
Company confidential
Figure 54: TX power level tuning 3
Figure 55: Stop TX power level tuning dialogue
Nokia Corporation.
CCS Technical Documentation
Issue 1 10/03