Module Test Jig; Mjf-17 Docking Station Adapter; Pcs-1 Power Cable - Nokia RH-77 Manual

2118 (RH-77)
Service Tools
MJ-42 Module Test Jig
The MJ-42 allows PWB-level service and troubleshooting for authorized service centers.
It supports regulated and unregulated DC input voltages and includes Local and Normal
Mode operations, a headset jack for audio tests, a RUIM card reader, and a second DC
input for VCHAR used in EM tuning. The MJ-42 also supports simultaneous RF
connections to the CDMA engine. A completely functional UI module is provided on the
right side.

MJF-17 Docking Station Adapter

The MJF-17 works in conjunction with the JBV-1 Docking Station and the FPS-8 Flash
Prommer to enable tuning, testing, and flashing. The MJF-17 supports the LYNX battery
interface, which does not require BTEMP, and also has a built-in RUIM card reader.

PCS-1 Power Cable

The PCS-1 is used to connect the service tools (e.g., JBV-1 Docking Station, MJS-82
Service Jig) to an external power supply.
Page 6
©2005 Nokia Corporation
Nokia Customer Care
Company Confidential Issue 01 04/2005