What's In The Box; Main Connection Scenarios; Figure 1 Kit Contents - Element 14 BeagleBone Black INDUSTRIAL User Manual

This section provides instructions on how to hook up your board. Two scenarios will be
discussed:
1) Tethered to a PC and
2) As a standalone development platform in a desktop PC configuration.
3.1

What's In the Box

In the box you will find three main items as shown in Figure 1.
• element14 BeagleBone Black Industrial
• miniUSB to USB Type A Cable
• Quick Start Guide.
This is sufficient for the tethered scenario and creates an out of box experience where the
board can be used immediately with no other equipment needed.
3.2

Main Connection Scenarios

This section will describe how to connect the board for use. This section is basically a
slightly more detailed description of the Quick Start Guide that came in the box. There is
also a Quick Start Guide document on the board that should also be refereed. The intent
here is that someone looking to purchase the board will be able to read this section and
get a good idea as to what the initial set up will be like.
The board can be configured in several different ways, but we will discuss the two most
common scenarios as described in the Quick Start Guide card that comes in the box.
element14 is a trademark of Premier Farnell plc
© 2016 Premier Farnell plc. All Rights Reserved
Figure 1 Kit Contents
13