Setting The Clock; Setting Alarm; Snooze Function; Timer Function - JVC RD-F327B Instruction Manual

SETTING THE CLOCK

1 In standby state, press and hold

12h / 24h will flash on the display.
2 While the time format is flashing, turn the
3 Press to confirm.

The hour digits will flash on the display.
4 While the hour digits are flashing, turn the
5 Press to confirm.

The minute digits will flash on the display.
6 While the minute digits are flashing, turn the
7 Press to confirm.

SETTING ALARM

1. In standby state, press and hold
off time > alarm mode > alarm volume".
2. Setting alarm on time: "ON" will flash on the display.
a) To set the hours, turn
confirm.
b) To set the minutes, turn
to confirm.
3. Setting alarm off time: "OFF" will flash on the display.
a) To set the hours, turn
confirm.
b) To set the minutes, turn
to confirm.
4.
Setting alarm mode: "TUNE" will flash on the display.
Turn
The sequence is TUNE > CD > USB > CARD, press
5. Setting alarm volume: "V-[volume level]" will flash on the display.
Turn
6. When the alarm is set, the clock icon
7. To cancel alarm: in standby state, press

SNOOZE FUNCTION

Press on the remote control when the alarm sounds. The alarm will be turned off for about 10 minutes and then the
alarm will sound again. This function can be used for repeatedly within the 1-hour alarm active interval.

TIMER FUNCTION

1. Push the power knob to power on the unit.

The red standby indicator light will go out.
2. Repeatedly press
3. The sleep time setting will be stored when the sleep icon
4. When the set sleep time has elapsed, the unit will be switched to the standby state.

LISTENING TO RADIO

RADIO TUNING

1. Press
2. Press
3. Tune in to the desired station by turning and holding
for about 3 seconds.
for about 3 seconds. The alarm sequence is "alarm on time > alarm
knob to select the correct hours, then press
knob to select the correct minutes, then press
knob to select the correct hours, then press
knob to select the correct minutes, then press
knob to select the alarm mode.
knob to select the alarm volume, press
will be display.
to choose the sleep time minutes from 90>80>70.....>10 off.
to activate the radio mode.
to select the desired band (AM or FM).
EN-5
knob to select 12h or 24h format.
knob to select the correct hours.
knob to select the correct minutes.
to confirm.
and the clock icon will disappear from the display.
is displayed.
knob for about 2 seconds and then release
to
to
to confirm.