Roksan Audio DARIUS S1 User Manual

Darius User Manual X A3.indd 1
3 Rear Firing Port x 2
4 Product Serial Number
5 Tweeter Input Terminal
6 Woofer Input Terminal
1 High Frequency Tweeter
2 Low Frequency Woofer
BI- WIRING
NOTE: 'Jump-bars'
CONNECTED
NOTE: 'Jump-bars'
REMOVED
Always switch the Ampli ers OFF before attempting to connect or discon-
nect the speaker cables to/from your speaker. Failure to do this may cause
permanent damage to the ampli er and/or speakers.
Your Darius S1 speaker requires at least 48 hrs of continuous music
programme at reasonable volume to allow the various moving parts of the
drive units and other component to 'burn-in' . After this period has elapsed,
the bass will increase in weight, de nition, extension speed and articulation
whilst the treble will sound more open, coherent and tactile.
ROKSAN DARIUS S1 - Specification
Tweeter
G2N Aurum Cantus, high fidelity, aluminum ribbon tweeter, fast transient
type
A nal adjustment and leveling of the speakers/spikes should be carried out
Woofer 5" Customised high fidelity woofer, optimally tuned
after the optimum position/location of the speakers in the room is estab-
Crossover Mundorf high quality components, air core baked inductors, polypropylene
low inductance capacitors, metal-oxide resistors.
SPEAKER CONTENTS
STAND CONTENTS
INTRODUCTION
BI- AMPING
NOTE: 'Jump-bars'
REMOVED
ROKSAN WARRANTY REGISTRATION
VISIT
24/10/2013 11:29:59
http://www.roksan.co.uk/rw.php