Advertisement

TR-5 S2
LOUDSPEAKER
MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Roksan Audio TR-5 S2

  • Page 1 TR-5 S2 LOUDSPEAKER MANUAL...
  • Page 2 TR-5 S2 Loudspeaker Manual Congratulations on your purchase of the Roksan TR-5 S2 loudspeaker. This Loudspeaker is designed and manufactured to the highest specification and rigorously tested to offer you many years of trouble-free pleasure. Correct installation, set-up and operation will have a profound influence on the sonic performance of the entire hi-fi system.
  • Page 3 TR-5 S2 Loudspeaker Manual UNPACKING After unpacking please retain all packing materials. Correct packing is necessary for future transportation of your TR-5 S2 Loudspeakers.
  • Page 4: Maintenance And Cautions

    Avoid use of abrasives or solvents. Your TR-5 S2 loudspeakers are high quality audio devices, therefore care must always be taken to transport, position and operate the units correctly. DO NOT expose the loudspeakers to extreme climatic conditions such as excessive cold, heat, sunlight, rain humidity or water etc.
  • Page 5: Installation

    TR-5 S2 Loudspeaker Manual INSTALLATION TR-5 S2 LOUDSPEAKER FRONT AND REAR VIEW 1. High frequency Ribbon tweeter 2. Low frequency woofer 3. Loudspeaker grille 4. Rear firing bass reflex port 5. Product label 6. Speaker terminal panel TR-5 S2 LOUDSPEAKER TERMINAL PANEL VIEW 1.
  • Page 6 TR-5 S2 Loudspeaker Manual POSITIONING AND PLACEMENT The positioning of the loudspeakers is very important to successful installation. The key is to find the best compromise between room constraints and performance. See the diagram below for general guidelines on positioning. Note that this is only a guideline and an ‘ideal’.
  • Page 7 (LF). There is a small illustration printed on the rear label for your reference. The TR-5 S2 loudspeaker comes supplied with a set of two removable ‘jump-bars’ already connected. To connect the loudspeaker conventionally, simply attach your speaker cable to the lower set of terminals marked ‘woofer’...
  • Page 8 Manual CONNECTING LOUDSPEAKER CABLES - BI-WIRING / BI-AMPING Your TR-5 S2 is bi-wirable. This is achieved by removing the ‘jump-bars’ from the terminals and using one set of loudspeaker cables for the tweeter connections and another set (of equal length) for the woofer connections.
  • Page 9: Operation

    When setting-up or testing your loudspeakers, choose music material that you are familiar with sit in the central listening position. Your TR-5 S2 loudspeakers will continue to improve in performance over the first few weeks of use and you should fine-tune the sound over this period if so desired by altering the positioning in small increments.
  • Page 10: Troubleshooting

    Manual TROUBLESHOOTING If you suspect that your TR-5 S2 loudspeakers are not operating properly, you should check all the connections carefully. Pay particular attention to speaker phasing (+ & -) and channel connections. Below are some common problems encountered with suggestions for the possible remedy.
  • Page 11: Specifications

    TR-5 S2 Loudspeaker Manual GUARANTEE There are no user-serviceable parts inside your TR-5 S2 loudspeakers. If a fault should develop, refer any servicing to your appointed Roksan dealer, distributor or Roksan approved service agent. Your TR-5 S2 loudspeakers are guaranteed against any defect in materials and workmanship for a period of two years from the date of purchase.
  • Page 12 Roksan Audio Limited Jubilee Close Townsend Lane London NW9 8TR +44 (0)20 8900 6801 info@roksan.co.uk www.roksan.co.uk Roksan Audio Ltd TR-5 S2 Loudspeaker User Manual CLASSIFICATION: General Use Version: 1.10 All specifications are liable to change without notice. E&OE...

Table of Contents