HSS Hire Uplight Operating & Safety Manual

Always use the carrying handles when moving the
Operating & Safety Guide 424
Uplight.
Always return the Uplight to the vertical position
by holding on to the handle on the base.
DO NOT look directly at the light.
DO NOT subject the Uplight to any violent knocks.

EQUIPMENT CARE

Never push the equipment beyond its design
limits. If it will not do what you want with reasonable
ease, assume you have the wrong tool for the job. Ask at
your local HSS Hire Shop for advice.
In the event that the bulb fails, return the Uplight to
your local HSS Hire Shop for replacement.
Keep the equipment clean, you will find this less of a
chore if you do it regularly rather than wait until the end
of the hire period. Always unplug the unit prior to
cleaning.
Do not use any chemicals or solvents to clean the
Uplight, wipe it over with a damp cloth or sponge.
When not in use, store the unit somewhere clean,
dry and safe from thieves.

FINISHING OFF

Unplug the unit, allow it to cool and give it a clean.
Finally, neatly coil the power supply cable ready
for return to your local HSS Hire Shop.
Uplight
Contact your local
0845 728 2828
Easy to use, knock resistant
temporary light.
...any comments?
If you have any suggestions to enable us to improve
the information within this guide please fax your
comments or write to the Product Manager at the
address below
Fax: 020 8687 5001
©HSS Hire Service Group Plc 2001 No. 424/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com
Code 57414