Advertisement
Assembly of the feet
Completion of the assembly
Before operating the device, make sure that the voltage and frequency conform to the para -
meters of the local mains supply. Further make sure that the power plug is compatible with the
power socket.
Upon activation of the honey extractor, the display will light up. Make sure to perform a test
run by starting the device with a low speed setting and gradually increase the speed with help
of the speed controller.
Be careful not to accidentally deform the drum of the honey extractor when moving the device
as this can lead to contortion of its inner frame.
Additionally, make sure that the frames do not collide with the inside wall of the drum as this
might lead to the leakage of honey.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
November 2020
Version
18
Seite 5
Advertisement
