Troubleshooting; Specifications - Sharp SABK2002I Operation Manual

Attention: Never remove calcification residue with hard implements, otherwise the seal
will be damaged

Troubleshooting

The appliance is not heating up. The indicator light does not come on -> the overheating
protection system has actuated.
• Switch in Off position, take the kettle off the base (after the kettle has cooled down
for a fairly long time) and put back on again. The appliance switches off before the
boiling process ends -> the appliance is calcified.
• Descale the appliance according to the instructions.
Disposal
This appliance has been identified in accordance with the European directive 2002/96/
EG on Waste Electrical and Electronic Equipment (WEEE). The directive paves the way for
effective EU-wide withdrawal and utilization of waste appliances.
Please ask your dealer or inquire at your local authority about current means of disposal.

Specifications

AC Line Voltage
Output power
Product weight
Capacity
Temperature range
Guarantee
Please keep your receipt as this will be required for any claims under this guarantee.
During this guaranteed period, if in the unlikely event the appliance no longer functions
due to a design or manufacturing fault, please take it back to the place of purchase, with
your till receipt and a copy of this guarantee.
The rights and benefits under this guarantee are additional to your statutory rights, which
are not affected by this guarantee. Only Sharp Home Appliances (Europe) has the right to
change these terms.
Further Terms & conditions of the warranty, please visit
Kettle_OM_6_Languages.indb 4
Home Appliances
50/60 Hz, 220-240 V
2400 W
1,17 kg
1.7 l
40°C - 100°C
www.sharphomeappliances.com
EN-4
2017-12-28 15:25:10