Download  Print this page

Sharp EKJ-103-WH Instruction Manual

Hide thumbs
   

Advertisement

EKJ-103-WH
KETTLE

Advertisement

   Summary of Contents for Sharp EKJ-103-WH

  • Page 1 EKJ-103-WH KETTLE...
  • Page 2 IMPORTANT SAFEGUARDS 1. Read all instructions before use and save for future reference. 2. Before using the kettle for the first time, remove and safely discard all packaging material and promotional labels. 3. The kettle is for household use only. Do not use outdoors. 4.
  • Page 3 14. Be careful of refilling the kettle when the kettle is hot. Do not overfill kettle as boiling water may spill out. 15. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
  • Page 4 PRODUCT DESCRIPTION Lid button Body Handle Switch Water gauge Indicating light Base Power cord Model name EKJ -103-WH Power supply 220-240V Power 1000-1200W Capacity 1.0L Product dimension(L X W X H) 203mmX145mmX173mm BEFORE USING YOUR KETTLE If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling a full kettle of water twice and then discarding the water.
  • Page 5 spout when boiling. Ensure that the lid is firmly in place before plugging into the power outlet. After pressing the open lid button, the lid will spring to the stated angle first, then you can lift open the lid to the maximum opening position. This design uses less force and helps to reduce hot water dripping.
  • Page 6 2. Wipe the outside of the kettle with a damp cloth or a mild detergent. Do not use alkaline based cleaning products. 3. Remember to clean the mesh filter at intervals. For easier cleaning, disconnect from any power, then detach the filter by gently pulling it out. Replace the filter after cleaning.

Comments to this Manuals

Symbols: 0
Latest comments: