Using The Grill/Griddle Function - Chefwave CW-SIRG Manual

USING THE GRILL/GRIDDLE FUNCTION

Grill:
1. Insert the Drip Tray into the
Rack on top of the main unit.
SŌSAKU
2. Plug the
both sides of the lower control panel will light up.
3. Use the Function switch to select the Grill function.
4. Place the foods you wish to cook on top of the grill rack.
5. Select the desired temperature by turning the Temperature
knob.
6. Select the desired cooking time by turning the Timer knob.
Doing this will also start the cooking, so make sure the unit is
plugged in before turning the knob.
7. The in-use indicators on both sides of the upper control panel
will light up, indicating that the heating elements are running.
8. When grilling is finished, the in-use indicators and the heating
elements will automatically power off.
Griddle:
To use the Griddle function, place a metal plate, tinfoil, or other
flat surface on top of the grill rack. Then, follow the same steps as
above.
NOTE: When griddling, do not block the holes at the edges of the
surface. Those vents allow heat to escape.
10
SŌSAKU
into the outlet. The power indicators on
. Put the Nonstick Grill