Advertisement
Quick Links
Advertisement
Related Manuals for ADTRAN SMART/RG SE81ac
Summary of Contents for ADTRAN SMART/RG SE81ac
- Page 1 Graphic Placeholder SE81ac Quick Start Guide...
- Page 2 Recommendations The SE81ac mesh extender is designed to provide speedy wireless connections. If connection speed is an issue in your home, you can also connect the extenders using Ethernet cables. Before considering this option, use the recommendations listed on this page to help you set up your SE81ac extenders more effectively.
- Page 3 3-story home, you might place the gateway on the 1st floor and the extenders on the 3rd floor. Note: If you place your extenders so they all connect to the gateway (wagon wheel configuration), the wi-fi signal strength will be roughly the same on each.
-
Page 4: Installation
Installation Note: SE81ac devices work best when placed right-side-up on a flat surface. Mounting an SE81ac on a wall or ceiling is not recommended or supported. 1. Connect a LAN port on the SE81ac mesh extender to your PC using an Ethernet cable. - Page 5 Note: The power rating is 12V - 5 -...
- Page 6 POWER...
-
Page 7: Logging In To Your Gateway
Logging in to your gateway To change the settings on your gateway, you must log into the gateway's interface. Make sure that you have completed the steps in "Installation" before you begin. 1. Open your internet browser application and type 192.168.1.1 into the address line. - Page 8 User Name: admin Password: admin When the SE81c is ready for use, the LED on the front of the device glows green. Notes: If you've forgotten your password, click Forgot password and follow the instructions to reset your gateway to the factory defaults. Then, enter the credentials provided with the gateway when you first received it.
- Page 9 WiFi Setup 1. In the left menu, click WiFi > Networks. The following page appears, showing information for the primary wireless network. The dual-band option is enabled by default. - 9 -...
- Page 10 2. Accept the default ID shown in the SSID field or enter the SSID for the network that you want to configure. You will need this ID for Step 8. 3. Choose a passphrase and type it in to the Password field.
-
Page 11: Additional Support
Guest WiFi Network Name (SSID) Guest WiFi Network Key (password) Additional Support If you require further instructions, please contact your local ISP Support. All Rights Reserved. SmartRG Inc., an ADTRAN company. ©2020 ADTRAN 901 Explorer Blvd NW Huntsville, AL 35806... -
Page 12: Fcc Statements
FCC Statements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 13 be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 14 tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.