Advertisement
Model
Rated lifting capacity
Max. fork height
Min. fork height
Fork length
Fork width (outside)
Fork width (inside)
Lifting speed
Descending speed
Net weight
1. The truck shall be used in accordance with instructions handbook.
2. Don't put the hand & foot under the fork at any time.
3. Don't work on the slope surface.
4. Quick lifting is prohibited for loads of more than 300kg. Any manipulation of the pressure relief valve is
strictly prohibited. All assembling, adjusting and maintenance shall only be done by industrial mechanics
trained people. These people must be familiar with all safety regulations of European and nationally
where the item is in use relating to the operation and maintenance of pedestrian controlled industrial
trucks.
5. Load should be put on the fork center. Side-load is strictly prohibited.
6. The truck shall not be used to transport persons.
7. It is recommended to the driver to wear security shoes.
8. No modifications shall be carried out which adversely affect the compliance of the truck with prEN 1757-4.
1. Screw (part No.158)
To prevent oil-leaking from oil tank during transportation, Air Screw (part No.158) is replaced with
Oil-sealing Screw in the factory. But it has to be replaced back when you put this truck in use.
How to change: Screw out Oil-sealing Screw, then screw in Air Screw with which the Pump housing
(No.160) is hung, thus keep oil tank always connecting with atmosphere.
2. Handle
During transportation, the handle is disassembled from the truck and packed separately. It has to be
assembled back and adjusted properly and carefully before use.
a) Handle installation:
Take 3 pieces of M10 Nut (No.185) & spring washer from spare parts bag. Select handle to match
the truck with the same fitting numbers.
Assemble the handle on the Handle Base (No.181) with 3 pieces of M10 Nut & Spring Washer
tightly.
Put the chain's Eye Bolt (No.110) in the slot at the front end of Pendulum Arm (No.112).
Specifications
0
16810011
520mm
196mm
9mm / stroke
∠ 0.1 mm/second
105kg
Safety Instructions
Installation & Adjustment
2
16810012
1000kg
800mm
85 ±2 mm
1140mm
680mm
356mm
112kg
1
Advertisement
