INSTALLATION
Portable Installation
Attach the feet using the supplied screws
(8 x ST4*12mm), screwing each oner into
the heater with a Phillips head screwdriver
(not supplied).
Wall Mounting
•
Do not fit with the feet if wall mounting.
•
Prepare the bracket with screws (figure 1).
•
Using the bracket as a guide for the holes, drill into the wall and insert the plastic
expanded plugs. Attach the bracket to the wall with screws (figure 2).
•
Place the heater in a suitable position, ensuing that the holes align with the
bracket (figure 3).
•
Tighten screw on the top of bracket to secure (figure 4).
•
Ensure the product is securely installed in the correct position and the power
cord is undamaged before its first use.