Page 1
TECHNICAL MANUAL MDS - BUS2 SYSTEM Section I System Description...
Page 2
Code 97586I-1 V06_10 This technical document of an informative nature is published by FERMAX ELECTRONICA S.A.E., who reserve the right to modify the technical characteristics of the products referred to herein at any time and without prior notice. These changes will be reflected in subsequent editions of this document.
MDS - B MDS - B US2 MDS - B MDS - B TABLE OF CONTENTS SECTION I - DESCRIPTION OF MDS-BUS2 SYSTEM MDS - BUS2 SYSTEM ..............................5 - Introduction: ................................5 MDS-BUS2 DECODER ..............................6 - Overview ................................. 6 MDS-BUS2 SYSTEM PROGRAMMING ........................
Page 4
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B Page 4 Code 97586I-1 V06_10...
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - BUS2 SYSTEM Introduction The BUS2 DECODER allows the user combine MDS infrastructure on General Entrances (MDS DIGITAL NCity entry panels) and on Interior Blocks, BUS2 equipment, panels and residential terminals.
MDS - B US2 MDS - B MDS - B MDS-BUS2 DECODER Ref. 3245 Overview This device has been designed to combine MDS and BUS2 Interior Blocks. Conversations within each block are independent, they can be held simultaneously with the entry panel or the general...
Page 7
See programming section. 1 MDS Repeater will be needed Ref. 2339 where the MDS BUS includes more than 120 BUS2 Decoders, (1 Repeater will be connected every 120 decoders). DECODER MDS-BUS2 1. BUS2 Bus Connector REF.3245 REF.3245 INI.
MDS - B MDS - B US2 MDS - B MDS - B MDS-BUS2 SYSTEM PROGRAMMING BUS2 Decoder Programming via the MDS Digital Panel S e a r c h n a m e Enter PROGRAMMING MODE a n d p r e s s...
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B Interior Block Programming under Option "C" via the MDS Digital Panel As described above there can be different types of set-up.
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B NOTE 1 -> DECODER Address based on the set-up type (A, B, C or D): TYPE C: TYPE D: TYPE A:...
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B Examples EXAMPLE 1: 16 block system (each block with a BUS2 panel). * 10 Blocks with 45 residences each, (Block 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10).
Page 12
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B EXAMPLE 2: 230 Chalet System with a single 1 line panel on each one. Observations: - The chalets should be numbered from 1 upwards.
Page 13
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B EXAMPLE 3: 8 block system with 115 residences each, (each block has a BUS2 panel). Observations: - The residences in each of the blocks should be numbered from 1 upwards.
Page 14
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B EXAMPLE 4: 10 block system with 45 residences each, (each block has a BUS2 panel). Observations: - All the residences in each block should be numbered from 1 upwards.
Page 15
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B EXAMPLE 5: 10 block system, (each block with a BUS2 panel) and 80 chalets with a 1 line digital kit panel (BUS2) in each. * 6 Blocks with 45 residences each, (Block 1, 2, 3, 4, 5 and 6).
Page 16
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B TYPE C: Medium Sized Blocks. Blocks, 3, 4 and 5 (programmed in the same way) Block 1 Block 2...
It is recommended that each of the Interior Block’s residences are programmed from 1 upwards. A detailed description of the features and functions corresponding to each terminal is given in the technical documentation: Manuals available on the Fermax website: www.fermax.com. Code 97586I-1 V06_10...
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B BUS2 Residential terminal programming via the General Entrance MDS DIGITAL Panel S e a r c h n a m e a n d p r e s s Enter Code...
Page 19
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B NOTES: Remember that if you want to start the programming process from an MDS panel (including guard units) they VDS decoder must have been pre-programmed as detailed under the "BUS2 Decoder Programming"...
MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS-BUS2 DECODER TECHNICAL FEATURES Power Supply 12 Vdc Consumption standby: 20 mA active: 30 mA Operating Temperature: 0 ÷ +50 ºC Installation Within a flush mounted box or within a building.
MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS-BUS2 SYSTEM SECTIONS TABLE These tables show the sections recommended by Fermax for BUS2 systems and MDS systems. DECODER MDS-BUS2 REF.3245 REF.3245 INI. FIN.
Page 22
In video door entry systems up to 400 metres a RG59 coaxial cable can be used. For greater distances use the RG11. FERMAX Cables Fermax cables Ref. 5918 and Ref. are suitable for distances of up to 300 metres. WIRE SECTION...
Page 23
MDS - B MDS - B MDS - B MDS - B MDS - B US2 MDS - B MDS - B MDS - B US2 MDS - B MDS - B Code 97586I-1 V06_10 Page 23...
Page 24
Audio and Video Door Entry Systems www.fermax.com fermax@fermax.com...