APRILIA ABS 1060 Instruction Manual page 8

Use
The device has a very sensitive sensor.If you want to adjust the settings,simply touch
the buttons gently with your finger.if the device does not respond to touch,clean the
glass surface with a soft,dry cloth.
NOTE: The scales are factory set with the units"kg" and "lb".
To change the settings to "lb" or "kg" and 'Ft:in", please touch the "unit "botton
Weighing Function
Place the scale on a hard,flat surface(avoid carpets).An uneven floor contributes to
inaccurate
Measurements.
• Stand on the scales with both feet.the device switches on automatically.
• Distribute your weight equally and wait for the scale to determine your weight.
• The digits on the display will flash before your exact weight will be shown.
• In order to extend the battery life,the device will automatically turn off 10
seconds after you have stepped off the scale.
Saving Personal Date
NOTE:
• The scale has default values that you can change,as described below.
• Carry out the following steps in sequence and within a few seconds
Otherwise,the device will automatically cancel input mode.
• Press the button SET. The memory space will flash on the display(USER0.Confirm
the setting by pressing SET or select another memory space by pressing the UP
DOWN button.then press SET to go to the next setting.
• The symbol for"male" or "female" will flash.confirm the setting by pressing SET or
use the UP/DOWN button to choose the symbol for your gender.then press to go
the next setting.
• The height setting will flash.select your height by pressing UP or DOWN button
holding down one of the buttons will accelerate the process.confirm your entry
by pressing SET.
• The setting AGE will flash.select your age by pressing UP or DOWN button
holding down one of the buttons will accelerate the process.confirm your entry
by pressing SET.
8