Cura1 ActiveCare 3508 Quick Start Manual

3508 - ActiveCare LED Pager
The cura 3508 LED Pager is a versatile tool for a caregiver
1
in either a facility or home care environment. The Pager can
be paired with up to 3 compatible wireless devices.
Optional Accessories & Compatible Devices
(Sold Seperately)
2552 DoorAlert Door Strip, 2558 Wireless Call Button with
Pull Cord, 2573 Wristband Duress Transmitter, 2588
Personal Emergency Transmitter (PET), 2719 Cordless Pad
Transmitter, 2721 iBeam, 3502 ActiveCare Wireless Handset,
3503 Wireless Magnetic Door Switch,
3504 ActiveCare Bracket
*The range of wireless devices may vary and
be dependent on your specific environmental conditions.
cura¹ products are designed to augment well designed care
programs & practices, cura¹ does not claim that any of its products
are suitable as a substitute, or as a total solution for individuals that
require care and constant supervision & are at risk.
STATUS
VOLUME PROGRAM CANCEL
ON / OFF
switch

Usage instructions

Status LED

Setting Alarm Tone

Device Indicator
There are 3 tones that can be selected. Press the
LEDs. Pair with
VOLUME button to toggle between these options:
(up to) 3 devices.
1. Low tone with vibration alert.
2. Silent but with vibration alert.
OPTION, MENU
3. High tone with vibration alert.
and CANCEL
buttons.
Alarms & Reset
When the alarm condition is active the pager will
vibrate and produce a continuous alarm tone (depending
on your VOLUME settings). The Device indicator LEDs
will indicate which device has the alarm condition and the
Status LED will blink red every 7 seconds until the pager
is reset.
To stop (reset) the alarm, press and hold the CANCEL
button for ~1 second.

Low Battery

Status LED flashes red.
Belt clip. Also fits
3504 Mounting
Bracket (optional).
UM-046