Replacing The Filter Unit - Dyson Pure Cool User Manual

Replacing the filter unit

1
When your non-washable filter unit needs replacing,
the machine will display the pattern shown. To replace
the non-washable filter unit, follow these steps. If the
machine has been in use, leave for 1 to 2 hours before
replacing the filter unit to allow the machine to cool down
completely. Your machine is programmed to remind you
to replace the filter unit after 12 months based on 12 hours
usage a day. Please note your indicator will activate sooner
with more use. The indicator is only a guide and you may
need to replace the filter unit more regularly.
4
When disposing of the exhausted filter
unit please do so in accordance with
local regulations.
7
When you have reassembled
your machine, press and hold
the Standby on/off button for 6
seconds on the remote control
to reset the filter indicator.
2
5
6 sec
3
6
A clockwise-rotating
loading pattern will be
shown on the LED display.
click
click
Once the loading
pattern is complete, the
machine will return to
its normal usage.
7