Advertisement
4. Attach the cable bridges to the rear slot on the shelf tray using two wing nuts per bridge.
5. Place the equipment on the shelf. Route the equipment's cables over the cable bridges. Secure the cables to
the cable bridges with cable ties (not included).
Shelf tray
TRADEMARKS USED IN THIS MANUAL
BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
© Copyright 2006. Black Box Corporation. All rights reserved.
1000 Park Drive
•
Installing the shelf.
Lawrence, PA 15055-1018
•
724-746-5500
Cable bridges
Cable support
bar
•
Fax 724-746-0746
Advertisement
