Table of Contents
Advertisement
Quick Links
SOLAR PIR SENSOR LIGHT
PARTS LIST
1. Mounting Bracket
3. Solar Cell Mounting Screws ( X 4 )
5. Main Battery Unit
7. Main Housing Mounting Screws
( X 2 )
9. AUTO / OFF Switch
11. Sensitivity Adjusting Knob
Important:
Please ensure that you charge the solar lights in maximum sunlight for a
period of up to 3 days before switching on the lights, in order that the lights work on
a full charge
MODEL：SLFS
2. Adjustment Support
2. Solar Cable
4. Solar Cell
6. Transparent Light Cover
8. PIR Sensor
10. Lux Control Adjusting Knob
12. Duration Time Adjusting Knob
ON
OFF
Advertisement
Table of Contents
Related Manuals for Challenger SLFS
Summary of Contents for Challenger SLFS
- Page 1 SOLAR PIR SENSOR LIGHT MODEL：SLFS PARTS LIST 1. Mounting Bracket 2. Adjustment Support 3. Solar Cell Mounting Screws ( X 4 ) 2. Solar Cable 5. Main Battery Unit 4.
- Page 2 █ battery in main unit. It requires DIRECT SUNLIGHT HOW TO DETERMINE WHERE TO MOUNT onto the surface of solar cell for as long as possible YOUR SOLAR PIR SENSOR LIGHT during the daytime. Use the four screws provided in the package (#3 on SOUTH parts list) to mount the solar cell unit onto a solid surface.
- Page 3 Leave the switch in this position for 3 sunny days to () is too light outside, turn the control towards ensure that the battery has a full charge for motion however, if the light is not activating during sensor adjustment and normal operation. nighttime because of a street light or bright house (☼).
- Page 4 A dirty solar panel will not allow the battery prior to publication. However, no responsibility to fully charge and this will shorten the life of battery can be accepted by Challenger Security Products and cause the light to malfunction for any misinterpretation of these instructions.
Need help?
Do you have a question about the SLFS and is the answer not in the manual?
Questions and answers