Table of Contents
Advertisement
General TV Operation
Sound & Source Controls
Confi guring Sound Settings
Sound settings can be confi gured according to your
personal preferences.
Press "MENU" button and select the fi rst icon by using
" " or " "
button. Press OK button to view Sound
Settings menu.
Operating Sound Settings Menu Items
"
" or "
"
Press
button to highlight a menu item.
" "
" "
Use
or
button to set an item.
Press "MENU" button to exit.
Sound Settings Menu Items
Volume: Adjusts volume level.
Equalizer: Press OK button to view equalizer sub-menu.
In the equalizer menu, the preset can be changed to
Music, Movie, Speech, Flat, Classic and User. Press
the "MENU" button to return to the previous menu.
NOTE: Equalizer menu settings can be changed manually
only when the Equalizer Mode is in User.
Balance: This setting is used for emphasizing left or
right speaker balance.
Headphone: Sets headphone volume.
Sound Mode: You can select Mono, Stereo, Dual I or Dual
II mode, only if the selected channel supports that mode.
AVL: Automatic Volume Limiting (AVL) function sets the
sound to obtain fi xed output level between programmes (For
instance, volume level of advertisements tend to be louder
than programmes).
Headphone/Lineout: When you connect an external
amplifi er to your TV using the headphone jack, you can
select this option as Lineout. If you have connected
headphones to the TV, set this option as Headphone.
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Dynamic Bass: Enables or disables the Dynamic Bass.
Surround Mode: Surround mode can be change as
On or Off.
Digital Out: Sets digital out audio type.
Confi guring Source Settings
You can enable or disable selected source options. The
TV will not switch to the disabled source options when
button is pressed.
"SOURCE"
Press "MENU" button and select Settings icon by using
" "
" "
or
button. Press OK button to view Settings
menu. Select Source and press OK button. Select
Sources in the Settings menu and press OK button.
" "
" "
Press
or
buttons to select a source. Use
"
button to enable or disable the selected source. Changes
are automatically stored.
Press RED button to edit the name of the selected source.
" "
"
or
25
Advertisement
Table of Contents
