Using An Ac Power Adapter; Charging The Battery - BenQ DC S40 User Manual

BenQ DC 5530 User's Manual

2.2 Using an AC Power Adapter

1. Make sure the camera power is off.
2. Connect one end of the AC power adapter to the
DC IN 5V terminal (A).
3. Connect the other end of the AC power adapter to
a power outlet (B).
•
Use only the AC power adapter specified for the camera. Damage caused by the use of
an incorrect adapter is not covered under the warranty.
•
Use an AC power adapter while transferring images to your computer in order to pre-
vent data loss from unexpected automatic power off of the camera.

2.3 Charging the Battery

1. Insert the battery as described in 2.1"Inserting the Battery" on page 5.
2. Connect the AC power adapter as described in the previous section, or connect the USB
cable to your camera and a USB enabled device such as a notebook or PC.
The following describes the LED indicators:
•
Orange LED: charging starts
•
LED Off: charging is complete
•
Use only the AC power adapter specified for the camera. Damage caused by the
use of an incorrect adapter is not covered under the warranty.
•
When using the USB cable to charge the camera, turn the camera off for better
charging performance.
•
Avoid exposing the camera to hot temperatures. Use it at room temperature for
best results.
6
Preparing Your DC S40 for Use
Notes
Notes
B
A