Advertisement
RECEIVER
Front
1
3
4
2
Rear
AF OUT
8
9
10
1. Power Indicator: The indicator will be illuminated when the receiver is
powered ON.
2. Power Switch: Press to switch the receiver power to ON and OFF.
3. ECHO: Rotate the echo knob to your desired level.
4. TONE: This control is used to adjust the bass, treble quality of the microphone.
The bass is decreased and treble is increased when the control turned
clockwise. The bass is increased and treble is decreased when the control
turned counter clockwise.
5. RF 1/2: The indicator will be illuminated when wireless microphone is on.
6. W/MIC1/W/MIC2: Rotate to adjust volume of wireless microphone
1/2 and wired dynamic M I C 1/2.
7. MIC 1/2: Insert the 6.3mm MIC plug of wired dynamic MIC(not provided) into
MIC 1/2 jack.
8. ANT 1/2: Receiving antenna of wireless microphone.
9. Audio output jack (RCA type): Connect this set of RCA Jack to Active
Speakers, Hi Fi system, etc. to output the nal mix of music and microphone.
10. AF OUT: Connect this jack to MIC IN of your amplier to output the nal mix of
music and microphone.
11. Audio Input Jack (RCA type): Connect this set of RCA jacks to an audio
source with RCA output such as DVD, Streamer etc. to bring in the music.
12. Aux In (3.5mm stereo type): Connect this jack to an audio source with
phone out such as computer, iPad, mobile phone etc. to bring in the music.
13. DC IN jack: Connect DC jack of supplied AC / DC adapter to this jack.
www.PyleUSA.com
5
6
5
6
7
7
AUX IN
11
12
13
8
2
Connection
Audio Input
To bring in music, connect audio source to L/R RCA INPUT jack on the back of
receiver with the provided RCA cables(white and red) if your audio source has
RCA output, such as DVD, Streamer etc.
Or connect audio source to AUX IN jack on the back of receiver with the
provided 3.5mm/3.5mm cable if your audio source has 3.5mm phone out, such as
iPad, Smartphones, Tablets, Laptops, Computers, etc.
Audio Output
Both the ¼ inch AF OUT jack and the left/right RCA output jacks on the back
of receiver output the nal mix of music and microphone. To output the sound
you need to have an additional audio device (speaker or ampli er) .
Connect the left/right RCA output jacks on back of receiver to RCA input jacks
on active speaker with supplied RCA cables. Or connect the ¼ inch AF OUT jack
on the back of receiver to MIC input jack on ampli er with supplied ¼ inch cable.
L
Audio
OR
R
Output
RCA input
Active Speaker
AF OUT
Audio
R
Input
L
DVD, Streamer etc.
RCA Output
Operation
1. After connecting the receiver to Ampli er(or Speaker) and Audio source,
connect the provided AC/DC adapter to the receiver.
2. Turn the receiver power on. Power indicator will be illuminated.
3. Turn the microphones power on. RF indicators on receiver will light.
4. Turn on your Ampli er(or Speaker) and Audio source.
5. Adjust Tone, Echo, MIC volume and music volume to your desired level.
Music volume need to be adjusted via your Audio source.
6. Now you are ready to sing!
MIC IN
Ampli er
Passive Speaker
AUX IN
OR
Phone Out
Computers etc.
3
www.PyleUSA.com
Advertisement
