Grounding Instructions - HoMedics Premier Pedicure Instruction Manual And Warranty Information

Footbath with heat boost power
Table of Contents

Advertisement

Available languages

Available languages

GROUNDING INSTRUCTIONS

Tab for
Grounding
Grounding Pin
Adapter
Screw
Figure A
Figure B
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of
least resistance for the electric current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product - if it will not fit the outlet, you may temporarily use an adapter (such as the one shown in
Figure B) until you have a proper outlet (such as the one shown in Figure C) installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug il-
lustrated in Figure A. A temporary adapter that looks like the adapter illustrated in Figure B may be used to
connect this plug to a 2-pole receptacle as shown in Figure D if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet Figure C can be installed by a
qualified electrician. The tab for grounding screw Figure B extending from the adapter must be connected
to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it
must be held in place by a metal screw. See Figures D and E.
PREMIER PEDICURE FOOT BATH
• Heat Boost Power heats water to warm spa temperature in minutes and maintains
temperature throughout use.
• Pedicure center with 3 attachments–pumice stone, cleansing brush, and massage rollers.
• Convenient storage for attachments.
• Easy controls to select bubbles, heat, vibration, adjustable temperature.
• Raised nodes in floor manually massage feet.
• 4 interchangeable massage inserts.
Grounded
Outlet
Metal Screw
Figure C
Figure D
Figure E
4
INSTRUCTIONS FOR USE
1. Ensure that the unit is unplugged before filling with water. Fill with warm water to the fill line located
on the inside of the tub. Colder water will take longer to warm up than warm water. For a quicker
Heat Boost, fill with warm water. Once water reaches selected temperature, it will stay at this
temperature for as long as heat function is selected.
2. Plug the unit into a 120-volt household outlet.
3. Sit down in a comfortable position. Press Power, then select your desired feature by
pressing the corresponding button. Press once to turn feature on. Press again to turn
feature off (Fig. 1). Note: The unit is equipped with a 30 minute auto shut-off.
a. Bubble Massage
b. Vibration Massage
c. Heat Boost – Press the Heat Boost button to select this feature. Button will
illuminate when selected. NOTE: Heat Boost will only work if bubbles and/or
vibration are selected. Press ↑↑ arrows to choose heat level.
- L 1 – low setting – maximum temperature 98°F
- L 2 – medium setting – maximum temperature 104°F
- L 3 – high setting – maximum temperature 110°F
NOTE: Always test water temperature before fully submerging feet into water.
4. To use attachments, remove desired attachment from storage caddy by gently turning as
you lift it off. Place on pedicure center of footbath. (Fig. 2)
Pumice Stone: Contoured pumice exfoliates the heels and balls of your feet to smooth and
soften dry skin
Cleansing Brush: Use to cleanse and exfoliate your feet
Massage Roller: Enjoy a relaxing massage
5. Enjoy an additional massage by sliding feet back and forth over the interchangeable
massage inserts on the footbath floor. Choose from acu-pressure or roller inserts. (Fig. 3)
Gently lift up to remove and replace by carefully aligning the posts and pressing down.
6. To empty, first unplug the unit. Take footbath to closest drain and tip unit, allowing
water to pour out along the back heel area. DO NOT pour water over the control panel.
Caution: To avoid injury and irreparable damage, always remain seated when using this footbath. Never stand on or in the unit.
CAUTION: THIS UNIT CAN ONLY RUN WITH WATER IN IT. DO NOT USE WITHOUT WATER.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fb-675

Table of Contents