Download
Share
Print this page
CARLO GAVAZZI SBPBASEB Manual
  1. Manuals
  2. Brands
  3. CARLO GAVAZZI Manuals
  4. Industrial Equipment
  5. SBPBASEB
  6. Manual

CARLO GAVAZZI SBPBASEB Manual

Carpark base holder
Hide thumbs Also See for SBPBASEB:

Advertisement

Quick Links

Download this manual
SBPBASEB
Carpark base holder
Description
The SBPBASEB is part of the Dupline
system.
It is a base holder for the SBPSUSxxx sensors and
SBPILED indicator.
The base holder contains the wiring terminals, the
chip with the SIN code and a RJ12 connector for
the sensor / indicator.
It is designed for ceiling mounting where the cables
or wires enter the base holder from the side.
Applications
Parking Guidance Systems
Main functions
•
Base holder for Dupline
carpark sensors and indicators.
®
20/03/2019
SBPBASEB ENG
Benefits
•
Plug & Play installation
•
One base holder suitable for the SBPSUSxxx sensors
and SBPILED indicator
On board chip with the SIN code and detachable
•
connector for Dupline
Carpark
®
3-wire
®
Carlo Gavazzi Controls S.p.A.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the SBPBASEB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CARLO GAVAZZI SBPBASEB

Summary of Contents for CARLO GAVAZZI SBPBASEB

  • Page 1 On board chip with the SIN code and detachable • connector for Dupline 3-wire ® Description The SBPBASEB is part of the Dupline Carpark ® system. It is a base holder for the SBPSUSxxx sensors and SBPILED indicator. The base holder contains the wiring terminals, the chip with the SIN code and a RJ12 connector for the sensor / indicator.
  • Page 2 Wiring terminals (POW, D+, D-) for power supply and communication (Smart Du- 2 x 3 PIN connector pline ® It is used to connect the sensor (SBPSUxxx) or indicator (SBPILED) to the base RJ12 female connector holder 20/03/2019 SBPBASEB ENG Carlo Gavazzi Controls S.p.A.
  • Page 3 -40 to 80°C ( -40 to 176°F) Humidity 5-98% Relative humidity Pollution degree 3 (IEC60664) Compatibility and conformity CE-marking Approvals Power Supply Power supply By the Dupline bus via the RJ12 connector ® Communication Protocol Smart-Dupline ® 20/03/2019 SBPBASEB ENG Carlo Gavazzi Controls S.p.A.

  • Page 4: Connection Diagrams

    SBPBASEB Connection Diagrams SBPILED SBPILED SBPILED 20/03/2019 SBPBASEB ENG Carlo Gavazzi Controls S.p.A.

  • Page 5: Mode Of Operation

    SBPBASEB and the SBPSUSxxx sensors and SBPILED indicator. Installation of the SBPBASEB together with the SBPSUSL45 The SBPBASEB together with the SBPSUSL45 sensor should be placed at a height between 2.2 to 2.4m. The depth of detection is 1.5 m. 1.5 m Fig.
  • Page 6 SBPBASEB Example 1 In this example the SBPBASEB together with the sensor should have been installed closer to the parking bay: The SBPBASEB is too far from the parking bay Put the SBPBASEB as close as possible to the parking bay...
  • Page 7 SBPBASEB Installation of the SBPBASEB together with the SBPSUSL The SBPBASEB together with the SBPSUSL sensor should be placed in the middle of the parking bay at a height between 2.0 to 4.0 m. 0.6 m ÷ 1.2 m Fig. 2 Sensor height and distance...
  • Page 8 In this way, the system is also able to detect the direction of the cars. Example 4 Please refer to the following table to place the two SBPBASEB bases together with the sensors at the proper distance. Sensor Min.
  • Page 9 SBPBASEB Example 6 In a one-way lane larger than the standard (2.5 to 3.25 m), SBPBASEB bases together with the sensors is placed in the middle of the lane: One of the SBPBASEB together with the sensor has been placed...
  • Page 10 SBPSUSLxx sensors. The SBPBASEB bases together with the SBPSUSCNT sensors have been placed at the end of the ramp The SBPSUSCNT sensors work properly if placed in the middle of the ramp...
  • Page 11 When mounting the SBPSUSxxx sensor on the ceiling, the sensor must be installed at an angle of maximum ± 5 degrees deviation from the ceiling surface. Mount the SBPBASEB and the sensor (SBPSUSL45 only) with a maximum horizontal deviation of ±2 degree to have the best performance in terms of signal reliability.
  • Page 12 SBPBASEB Additional conventional warranty This product is provided with a ten-year warranty. For further information, please refer to the Additional conventional warranty - Performances and proper functioning. 20/03/2019 SBPBASEB ENG Carlo Gavazzi Controls S.p.A.
  • Page 13 Carpark conventional war- warranty - www.gavazziautomation.com ranty Performances proper functioning Order code SBPBASEB Note: The base is delivered without a sensor. Please order it separately. CARLO GAVAZZI compatible components Purpose Component name/code Notes Controller UWP30RSEXXX Bus generator SBP2MCG324 Lane sensor...