Table of Contents
Advertisement
14.
Connect the power and restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
15.
After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM
SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp Settings
page displays. Highlight Reset lamp timer. A warning message displays asking if you
want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp
time will be reset to "0".
Do not reset if the lamp is not new or replaced as this could cause damage.
Maintenance
65
Advertisement
Table of Contents
