Advertisement
INSTALLATION
Base Mount
1.
Align the mounting base hole with the hole at the bottom of the bar light. Ensure
the mounting base and the bar light are in the linear position.
2.
Insert screw into the mounting base hole and the bar light hole and tighten the
screw with the Allen key.
3.
Repeat the above steps to mount the second bar light.
4.
After the bar lights have been locked to the mounting base, you cannot swing the
bar lights in any direction.
Sticker Mount
1.
Stick one end of the adhesive stickers to the back of the bar light as shown in the
image.
2.
Clean the mounting surface. Remove the other side of the stickers' paper and stick
the bar light to the mounting surface.
3.
Repeat the above steps to stick the second bar light.
Advertisement
