Function Description - BenQ MS614 User Manual

Function
Teaching
Template
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color
Color
Temperature
3D Color
Management
Save Settings
48 Operation
Provides several preset patterns for various teaching purposes.
Choose Blackboard or Whiteboard first by pressing
/ to choose the pattern you need. Press MODE/ENTER to activate
the pattern.
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 27
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
details.
Adjusts the brightness of the image. See
28 for details.
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 28
Adjusts the color saturation level -- the amount of each color in a video
image. See "Adjusting Color" on page 28
This function is only available when a Video, S-Video or
Component Video signal is selected.
Adjusts the red and green color tones of the image. See
on page 28 for details.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 28
This function is only available when a Video, S-Video or
Component Video signal is selected.
See "Adjusting Brilliant Color" on page 28
There are four color temperature settings available. See
color temperature" on page 28
See "3D Color Management" on page 29
Saves the settings made for User 1 or User 2 mode.
Description
for details.
"Setting the User 1/User 2 mode" on page 27
"Adjusting Brightness" on page
for details.
for details.
for details.
for details.
for details.
for details.
/ and press
"Selecting a
for
"Adjusting Tint"
"Adjusting
"Selecting a