Cleaning And Maintenance - Klarstein 10030714 User Manual

Warning: Danger of electrical shock
Please ensure that your appliance is disconnected from your mains supply before attempting to
clean it.
Cleaning
• Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
• Turn off the wine cooler first and then unplug the unit from the wall outlet.
• Remove all contents.
• Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution.
• The solution should be about 2 tablespoons of baking soda to a quart of water.
• Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
• The outside of the wine cooler should be cleaned with mild detergent and warm water.
• Dry the interior and exterior with a soft cloth.
• Dust or anything else blocking the vent may hinder the cooling efficiency of the appliance. Vacuum the
vent if necessary.
Vacation time
Short holidays: Leave the wine cooler in operation for holidays of less than three weeks.
Long absences: If the appliance will not be used for several months, remove all items, turn off the appliance
and unplug the electricity cable. Clean and dry the interior thoroughly. To prevent odour and mould growth,
leave the door open slightly by blocking it open if necessary.
Moving Your Appliance
• Turn off the wine cooler first and then unplug the unit from the wall outlet.
• Remove all the contents.
• Securely tape down all loose items inside your appliance.
• Tape the doors shut.

Cleaning and Maintenance

20