Reset Button; Supported Cisco Antennas And Antenna Accessories - Cisco Catalyst IR1800 Rugged Series Installation Manual

Reset Button

LED Description
Number
7 4 GE LAN ports labeled 1/0, 1/1, 1/2, 1/3
See the IR1800 Software
Note
Configuration Guide for IOS-XE
Naming conventions.
8 PoE Power Status
9 RJ45 Gigabit Ethernet WAN
Note Either the SFP or the RJ45 LED
will be on depending on what type
of interface is used on the combo
port.
10 SFP Gigabit Ethernet WAN
Note Either the SFP or the RJ45 LED
will be on depending on what type
of interface is used on the combo
port.
Reset Button
The Reset button resets the router configuration to the default configuration set by the factory. To restore the
router configuration to the default configuration set by the factory, use a standard size #1 paper clip with wire
gauge 0.033 inch or smaller and simultaneously press the reset button while applying power to the router.
The reset button will not cause a reset while the device is running.

Supported Cisco Antennas and Antenna Accessories

The IR1800 must have a Pluggable Module with antenna ports installed in order to connect antennas. The
base unit does not have any wireless capabilities on its own.
The
the Cisco IR1800 with a wireless Pluggable Module. For detailed information about Cisco Antennas for the
Industrial Routers, please refer to the following guide:
Cisco Industrial Routers and Industrial Wireless Access Points Antenna Guide:
http://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/antennas/installing-combined/industrial-routers-and-industrial-wireless-antenna-guide.html
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
20
Antenna Selection and Installation, page -23
LED Status
Steady Green - Port is up with link
Flashing Green - Link with activity
Off - Port is off/down
Steady Green - POE/POE+ power supplied on one LAN Port
Off - No POE/POE+ power on any LAN port
Steady Green - Port is up with link
Flashing Green - Link with activity
Off - No link or port is off
Steady Green - Port is up with link
Flashing Green - Link with activity
Off - No link or port is off
chapter lists the supported Antennas and Accessories for
Product Overview