Page 2
Further, BENQ Corporation reserves the right to revise this publica- tion and to make changes from time to time in the contents hereof without obligation of BENQ Corporation to notify any person of such revision or changes.
Please check you have the following items. If they are missing or are damaged, please contact the dealer immediately at which you purchased the good. LCD monitor with undetachable signal cable Quick Start Guide CD-ROM Power cord Extension Base Benq LCD Color Monitor User's Guide English 3...
100 to 240 Volt at a frequency of 50 to 60 Hz. Be sure that your local power is within the supported range. If you are unsure, ask your electricity supplier. Power cord Benq LCD Color Monitor User's Guide 2 . Connect the power cord to BENQ LCD monitor. Signal English 6...
2. Press “<” or “>” key to make adjust- ment. The scale can be adjusted from maximum (100) to minimum (0). 3. Press the “Exit” to leave OSD operation. The adjustment can be auto-saved. Benq LCD Color Monitor User's Guide ikey Exit < > Enter “<”...
Press “<”or “>” key to select this item and press “Enter” to enter sub-menu. There are two items for luminance adjustments. Brightness: adjust the brightness of the display. Contrast: adjust the difference between the light and dark areas. Benq LCD Color Monitor User's Guide Luminance English 34...
Page 10
V. (Vertical) Position: adjusts the vertical position of the display. Phase: adjusts the phase of pixel clock. Pixel Clock: adjusts the frequency of the pixel. Benq LCD Color Monitor User's Guide Geometry English 35...
Page 11
“Enter” to adjust color temperature. “<”or “>” Press key to select this item and press “Enter” to enter sub-menu. There are three items for miscellaneous. OSD Position : to adjust position of OSD. Color Adjustment Miscellaneous Benq LCD Color Monitor User's Guide English 36...
Page 12
OSD horizontal position of the display. V. (Vertical) Position: adjusts the OSD vertical position of the dis- play. Press “<”or “>”key to select a language then press ”Exit” to back to previous menu. Benq LCD Color Monitor User's Guide English 37...
Page 13
“Information” sub menu the OSD display the resolution, hori- zontal and vertical refresh rate. Press “Enter” to recall to factory set- ings. Benq LCD Color Monitor User's Guide Information English 38...
Additional Help, Repairs & Service. Is the prompt on the display not illuminated at all? Check the power supply mains socket, the external power supply and the mains switch. Benq LCD Color Monitor User's Guide English 39...
Read the chapter, Installation/Adjustment and then select the correct resolution, refresh rate and make adjustments based on these instructions. Need More Help? If your problems remain after checking this manual, please contact your place of purchase or e-mail us at: DPLservice@benq.com Benq LCD Color Monitor User's Guide English 40...
But do not be con- cerned about this, as it is normal. hTo extend the service life of the product, we recommend that you use your computer's power management function. Benq LCD Color Monitor User's Guide Vertical Pixel Frequency Frequency (Hz) (MHz) 70.08(N)
Input signal Synchronisation Temperature (operating) Air humidity (operating) Certifications Operating voltage Dimensions (W x H x D) Weight Benq LCD Color Monitor User's Guide FP557 15.0" ,active, TFT 38.1 cm 1,024X768 16.7 million 350:1 / 250 cd/m² 30 ms 60/60, 40/60 31.47 - 60.02 kHzMulti- frequency monitor...