Table of Contents
Advertisement
2.8.
Xd. User password change
Once accessed as USER, scroll the menu using the Up/Down key up to the X. menu and access by pressing the Enter key.
Scroll the menu again by using the Up/Down key up to the a. menu and access by pressing the Enter key.
Once in the screen, it will be possible to switch to the edit mode by pressing the Enter key.
The parameter that can be edited by using the Up/Down keys will be the one highlighted by the cursor and you will confirm by using the Enter key or
exit without confirming by using the Esc key.
Press the Enter key to switch between parameters.
Xd01
2.9.
Alarms
If the Alarm key is on fixed or flashing, press the relative key to display the alarm and contact the support centre.
2.10.
Qb. Unit On/Off
Use the Up / Down key to bring the short menu icon to On/Off and confirm by using Enter and access the screen Qb01 for switching the unit on and off.
The unit can be switched on
2.11.
Qc. Adjustment temperature, flow fan and operating mode set-point
Use the Up/Down key to bring the short menu icon to Set and confirm by using Enter to access the Qc01 screens to set the flow temperature (within the
factory limits in the QC03 screen) and the flow rate (inside the factory default values), Qc02 to set the heating, cooling, automatic mode.
Once in the screen, it will be possible to switch to the edit mode by pressing the Enter key.
The parameter that can be edited by using the Up/Down keys will be the one highlighted by the cursor ( type
confirm by using the Enter key or exit without confirming by using the Esc key.
Press the Enter key to switch between parameters.
Qc01
Standard
version
Qc01
CO2 version
10
(if not switched off from BMS or digital input) or off via the Enter key
.
) and you will
Advertisement
Table of Contents
