Vacuum pen equipped with vacuum pad and vacuum generator (28 pages)
Summary of Contents for PISCO SUS316 equivalent
Page 1
⇨ Easy maintenance by retightening nuts Max service pressure 1000psi ( 6.9MPa) ⇨ Wide range of use Ball Valve feature The stem does not come off SUS316 equivalent is used for liquid contacting part Structure preventing stem from detachment ※) SUS316 or CF8M...
Page 2
ø12 ②. Construction Code Construction 1 piece, reduced bore ①. SUS316 equivalent Ball Valve comes with SUS316 Push-in Fitting models SUS316 Push-in Fitting for SUS316 equivalent Ball Valve ■ SSPC ④. Specialized for 10 series of SUS316 equivalent Ball Valve ①...
Be sure to place Insert Ring into the tube edge when using water or liquid as a fluid medium. The specification above may not be applied, depending on the kind of chemicals or mixed gases used as fluid medium. Make sure to use PISCO products after verifying their suitability on the user side. Construction ■NSBVF10...
Page 4
38.5±1.5 20.5 19.82 NSBVF10 - 04 23.73 Rc1/2 56.6 27.3 27.5 91.5±1.5 44.5±1.5 24.5 NSBV10 SUS316 equivalent 10 series models with SUS316 push-in fittings 2-H1 2-H2 øP ø4㎜, ø6㎜ type Unit:mm Tubing O.D. Tube End Hex. Hex. Weight Orifice dia. Price Model øP...
Page 5
NSBL Butterfly lever for SUS316 equivalent Ball Valve 10 series models ød Image of installation Unit:mm Weight Price Model ød (g) ($) NSBL10 - 02 23.6 43.4 21.7 3.64 NSBL10 - 03 26.8 48.2 23.2 24.7 3.82 NSBL10 - 04 31.5...
Page 6
3.Make sure to understand the valve's components' material properties, considering the fluid medium and usage environment before use. Most parts are made of SUS316 equivalent, but some parts where the fluid medium does not come into contact are made from SUS304 equivalent.
Transportation • Storage ・Turn the valve handle to the fully open position when transport or store otherwise it may lead to ball seat deformation. ・Store the valve indoor, avoiding dust and foreign matter. ・To prevent from dust and foreign mater, do not unwrap packaging before installation. Installation ・Before installation, use air blow or water to clean valve internal.
- Ball Valve SUS316 equivalent Open and Close ・Turn the handle 90° counterclockwise (Open) to open the valve and turn 90° clockwise (Shut) to close the valve. ■NSBVF10 ■NSBVF30 OPEN OPEN STOP STOP Maintenance 1.After the installation, carry out regular inspection and maintenance periodically, considering environment including use frequency, temperature, fluid flow rate, pressure, fluid medium, etc 2.Periodically use soapy water or leakage checker to ensure there is no leakage.
This manual is also suitable for:
Nsbvf10 seriesNsbvf10-02Nsbvf10-03Nsbvf10-04Nsbvf30 seriesNsbvf30-02...
Show all